Tuesday, 20 March 2012

Caravan Rebuild - Part 1

Caravan purchased, my Dad very kindly offered to tow it home for us whilst visiting for the weekend.  It was a nervous drive home, not for Dad but for me.  I had visions of getting home only to find the caravan had disintegrated on the way there.  Fortunately it hadn't and there was no smell of burning rubber either, so the chassis suspension appeared okay.  Dad and Dan Forman my brother, positioned it expertly on the drive and then promptly began to gasp at the amount of work to be done internally and externally.


Unfortunately I didn't take any photo's before I started ripping out the caravan guys handy work at the front of the caravan, unfortunately when we had got it home and in the light we found a large wet patch above the front window behind the curtain - so if I was going to do this job properly I needed to unveil and take a look at the damage.  It was easy removing the window seals as he had put them back in after his attempt at repair without any mastic or silicone sealant, was this the reason the windows had leaked and there was a visible wet mark on the replacement ply!  Ripping out the ply was easy, he had tacked it in place without adhesive.  The wooden struts I found were new in parts with older ones in others and caravan guy had used expanding foam as insulation which was very difficult to remove and my hands suffered as a consequence.  The following photos are a sequence of the strip down....








A combination of new, old and rotten struts!



 In the last photograph you can see all of the struts removed and a couple of old wood struts that are used to keep the windows in place and shut.

At the same time we started to unveil the damp in the shower room/toilet in the back quarter of the van...




 In fairness this looks quite tame compared to the window section at the front.  Also just below the front window section on the right hand side there is some work to do.


So with the unveiling complete after the strip down we were certainly in need of a stiff drink....luckily the drinks cabinet was fully stocked.


Rebuild Part Two to follow shortly

4 comments:

  1. Well, it's starting to take shape, a lot of love is going into it and a big thank you to my brother for all his help. My other brother is waiting his turn to get back in to fit all the new electrical bits!
    I can't wait to make the new curtains and get those up and the new floor vinyl tiles down!!

    ReplyDelete
    Replies
    1. It's certainly a labour of love Karen - I did similar in 2011 on a 1990 Lunar Clubman.
      See http://www.colin-lee33.pwp.blueyonder.co.uk/lunar/index.htm

      It's hard work and time consuming too - but don't get disheartened.

      We are now enjoying our caravan and the hard work has paled into insignificance.

      Colin

      Delete
  2. Interesting.....I am 2/3 of the way through rebuilding a 1992 Avondale 2 Berth - I have had to remove 25% of all wood due to it being nothing more than a smelly sodden mass of black crumbly bits....at least there can't be any more bad news now all four corners have been stripped and replaced with 21mm tanalised wood...time consuming though having to measure and cut it from 12' planks!

    Good luck

    ReplyDelete
  3. Are you taking plenty of pics as you go? It's a great help for others doing repairs.

    Good luck with last third of your rebuild.

    Karen

    ReplyDelete