Monday 11 March 2013

Blow Heating

Well had a little trouble on our last outing, although the blow heating was working after a while it would cut out, when the fan started again it was blowing cold!  As we wanted the heating to work during the night to keep the chill off this wasn't good, as in order to get heat again you had to take out the drawer above the fire to reach the reset switch!

Gary from Arc Systems was contactable through UK Campsite Forum Repairs and was able to advise that a build up of dust on the fan blades can often be the culprit.  Not enough air passes through to regulate the thermostat and the safety feature is that it cuts out as it gets too hot and has to be reset.  Just by cleaning the blades of even a little surface dust it can make a difference.

The tricky thing is reaching the MK1 fan on the back of the fire......



Two drawers above it are the only access to the back of the fire without removing it!!  Well we took both drawers out and using a mirror and a torch we were able to identify where the screws were and started to remove it.

Getting it out was tricky due the electrical unit on the back and the fan motor which we had to half remove to tilt it through the opening.  We removed the fan and I carefully cleaned it with cotton bud and mini brush - boy it was more than a thin covering.

Once cleaned, fan was reattached, fed back behind the fire and electrical unit back on and reattached.

Plugged electric cable in and hey presto warm air with no tripping for a few hours.  So now we will be toasty on a night.  All good.

Sorry no pics - should have done really just so you could see the dirt build up but was that keen to get it back in and working - didn't get any taken.

2 comments:

  1. came across your blog tonight and read through it all, very informative and has set myself up for my project, very inspiring what you have done, especially as it was your first caravan too. My first attempt at damp was minor, just around the front windows at the bottom....i thought i did well until i saw how much you did in this blog. It is very satisfying knowing all the hard work and effort will keep the caravan good for another number of years use and family enjoyment. Hope its gone to a good home.
    cheers
    Dave

    ReplyDelete
  2. Thanks Dave - I am hoping it did go to a good home. We did a lot of work and it was a great start for us, and it has helped me to become more confident in tackling jobs on our newer van. As it happens i'm doing a cracked shower tray repair this weekend hopefully!! Good luck with your project and if you can take photo's and share, as there will be many more people after us looking for advice and support.
    Karen

    ReplyDelete